Adesilex P9 Slow Set Adhesive Grey 20kg
Colour: Grey Size (kg): 20kg Suitability: Internal and external use. Suitable for all types of ceramic tiles and mosaics on floors and walls. Also available in white
Adesilex P9 Slow Set Adhesive White 20kg
Colour: White Size (kg): 20kg Suitability: Internal and external use. Suitable for all types of ceramic tiles and mosaics on floors and walls. Also available in grey
Gel-Tech Semi Rapid White 20kg
Colour: White Size (kg): 20kg
Keraflex Grey Tile Adhesive 20kg
Colour: White Size (kg): 20kg Suitability: Internal and external use. Suitable for all types of ceramic tiles, mosaics and natural stone (as long as it is moisture stable). Also available in white
Keraflex White Tile Adhesive 20kg
Colour: White Size (kg): 20kg Suitability: Internal and external use. Suitable for all types of ceramic tiles, mosaics and natural stone (as long as it is moisture stable). Also available in grey
Colour: Grey Size (kg): 20KG Suitability: Internal and external use. Suitable for all types of ceramic and porcelain tiles, mosaics and natural stone.
Mapei Keraquick S1 Rapid Set Flexible Adhesive Grey 20kg
Colour: Grey Size (kg): 20KG Suitability: Internal and external use. Suitable for all types of ceramic and porcelain tiles, mosaics and natural stone. Also available in white
Mapei Keraquick S1 Rapid Set Flexible Adhesive White 20kg
Colour: White Size (kg): 20KG Suitability: Internal and external use. Suitable for all types of ceramic and porcelain tiles, mosaics and natural stone. Also available in grey
Mapeker Rapid Set Flex Grey 20kg
Colour: Grey Size (kg): 20kg Dry time: 3 hours Suitability: For internal and external bonding of ceramic and porcelain tiles and mosaics and natural stone materials that are not sensitive to moisture. Use the white one for the installation of light coloured natural stone. Used on concrete, screed, render and plaster (when primed with Mapei Plaster Primer). This product can be used with underfloor heating encapsulated in levelling compound. Also available in white The Technical Data sheet for this item can also be found here * Not suitable for moisture-sensitive natural stone
Mapeker Rapid Set Flex White 20kg
Colour: White Size (kg): 20kg Dry time: 3 hours Suitability: For internal and external bonding of ceramic and porcelain tiles and mosaics and natural stone materials that are not sensitive to moisture. Use the white one for the installation of light coloured natural stone. Used on concrete, screed, render and plaster (when primed with Mapei Plaster Primer). This product can be used with underfloor heating encapsulated in levelling compound. Also available in grey The Technical Data sheet for this item can also be found here * Not suitable for moisture-sensitive natural stone
Palace Easi-Flex One Part Slow Set Adhesive Grey 20kg
Colour: Grey Size (kg): 20kg Suitability: Fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel. Also available in white
Palace Easi-Flex One Part Slow Set Adhesive White 20kg
Colour: White Size (kg): 20kg Suitability: Fixing ceramic tiles, mosaics, marble and natural stone to solid impermeable floors and 15mm ply-wood overlay The manufacturers coverage guidelines state that 20kg will cover approximately 5m2 on a floor, when using a 10mm notched trowel. Also available in grey
Palace Trade-Flex One Part Flexible Rapid Set Adhesive Grey 20kg
Colour: Grey Size (kg): 20KG Suitability: Fixing porcelain and vitrified tiles to a solid surface, heated sub-floor or 15mm ply-wood overlay Also available in white
Palace Trade-Flex One Part Flexible Rapid Set Adhesive White 20kg
Colour: White Size (kg): 20KG Suitability: Fixing porcelain and vitrified tiles to a solid surface, heated sub-floor or 15mm ply-wood overlay Also available in grey
Colour: Grey Size (kg): 15kg Coverage: 1.5-2.5kg per 1m2 (maximum bed depth of 10mm) Suitability: Ideal for bonding all sizes and types of ceramic, porcelain and non-moisture sensitive natural stone tiles and mosaics to internal and external walls and floors The Technical Data sheet for this item can also be found here Note: Do not use on metallic, rubber, PVC or linoleum surfaces. Don't use with marble or artificial composite material subject to considerable movement in the presence of humidity. Do not apply directly over underfloor/under tile heating systems. Pipes or heating cables must be encapsulated in either a suitable screed or smoothing compound. Do not add more water to the mix once it has started to set.
Weber Weberfloor Flex Flexible Fibre Reinforced Floor Screed 25kg
For Internal Use Low Dust Technology 5 - 50mm Depth 1-2 Hours Set Time 25kg: 5L Mixing Ratio Tile After 2 Hours Coverage: 1.5m² @ 10mm Thickness Bag Size: 25kg
Is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use. It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses:For fixing ceramic, porcelain and natural stone tiles: Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.
Is a rapid-setting, flexible, low-dust, cement-based floor and wall tile adhesive, available in light grey or white for interior and exterior use. It is used to fix all ceramic floor and wall tiles, mosaic, quarry, terrazzo, terracotta, porcelain and natural stone in situations where some movement or vibration is likely. Uses:For fixing ceramic, porcelain and natural stone tiles: Walls and floors Interior and exterior Heated floors Overboarded wooden floors Low porosity tiles or substrates Tiling onto existing tiles Constraints: Not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber.
weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. weber pr360 is normally recommended for most walls in dry areas. weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm
weberset SPF Tile Adhesive is a flexible, cement-based polymer modified tile adhesive for internal & external use, suitable for use with underfloor heating. It is suitable for use with substrates subject to movement or expansion and is high-grab — non-slip for walls and floors. weberset SPF Tile Adhesive is available in grey or white, supplied in 20kg bags. weberset SPF Tile Adhesive has extended open time for internal and external use and is suitable for fixing all types of ceramic wall and floor tiles, mosaics, marble, terrazzo, natural stone, brick slips and glass blocks in areas that will be dry or wet. It is particularly suited for situations where some movement, deflection or limited shrinkage is likely. weberset SPF Tile Adhesive is best suited for fixing ceramic or porcelain tiles, on to most common substrates: • Walls and floors• Interior and exterior situations• Underfloor heating• Undertile warming• Overboarded wooden floors• Low porosity tiles or substrates• Power-floated screeds• Tiling onto existing tiles Constraints: weberset SPF Tile Adhesive is not recommended for tiling onto single layer wooden floors, e.g. chipboard, tongued and grooved timber. Not recommended for tiles with resin backs. Please contact technical services for application advice. Preparation:Prior to using weberset SPF Tile Adhesive ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier. Make good any unsound areas and remove flaky or peeling layers before tiling. Prime porous or dusty surfaces. Weber PR360 is normally recommended for most walls in dry areas. Weber AD250 is recommended for wood, wet areas and floors. Allow the primer to dry. Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles. Technical Data:Bed thickness: 3 – 6mm (may be exceeded in small areas only)Coverage (approx.): 9 kg/m2 (solid bed, 6 mm thick), 4.5 kg/m2 (solid bed, 3 mm thick), 3.0 kg/m2 (using a notched trowel with 6 x 6 mm notches at 12mm centres)Open time: 30 minutesWorking time (pot life): 1 hour after mixingSet time: 24 hours – light foot traffic, full load after 48 hoursTemperature resistance: –10°C to 100°C and frost resistant when setWater addition: 5 litres per 20kgParticle size: Up to approx. 0.5mm