Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and cementitious adhesives, for internal and external application. ADVANTAGES: Almost no odour and solvent-free Ready to use No health risks Specific for smooth substrates with low absorbency Where to use: Multi-purpose, ready-to-use primer for internal and external floors and walls. Eco Prim Grip Plus is suitable for improving the bond of adhesives for smoothing ceramics and levelling compounds on non-absorbent surfaces, such as ceramic, terrazzo and natural stone floors and smooth surfaces like for example epoxy or polyurethane resins. Eco Prim Grip Plus may be also used to improve the bond of cement and lime-based plasters on substrates made from concrete, brickwork, and vibro-compressed concrete blocks. Technical Data: https://cdnmedia.mapei.com/docs/librariesprovider12/products-documents/1_02946_eco-prim-grip-plus_en_de5b98ec7262445bb562f87bc73cd4fc.pdf?sfvrsn=e72aabb2_0
For use with Mapei Keraquick. Improves flexibility, protects from frost and allows use on timber. Suitable for walls or floors, and interior or exterior use. Mix with Keraquick Grey (8kg for each 25kg bag of powder) or Keraquick White (7.5 kg for each 23kg bag of powder) in a clean container and stir continuously until a smooth paste is obtained.
Colour: Blue Size (kg): 1kg (also available in 5kg) Suitability: For treating gypsum surfaces prior to installing ceramic tiles, as an anchoring coat for gypsum-based sprayable plasters, to improve adhesion of smoothing compounds on cementitious or anhydrite and gypsum-based surfaces and to provide uniform absorption in cementitious or gypsum surfaces. The Technical Data sheet for this item can also be found here Note: Not suitable for waterproofing gypsum substrates, even though it considerably reduces their porosity and absorption. Do not apply onto magnesium substrates. Not recommended for external applications or where rising damp is present. Do not apply in such a quantity that it forms a surface film, dilute with water as appropriate.
Colour: Blue Size (kg): 5kg (also available in 1kg) Suitability: For treating gypsum surfaces prior to installing ceramic tiles, as an anchoring coat for gypsum-based sprayable plasters, to improve adhesion of smoothing compounds on cementitious or anhydrite and gypsum-based surfaces and to provide uniform absorption in cementitious or gypsum surfaces. The Technical Data sheet for this item can also be found here Note: Not suitable for waterproofing gypsum substrates, even though it considerably reduces their porosity and absorption. Do not apply onto magnesium substrates. Not recommended for external applications or where rising damp is present. Do not apply in such a quantity that it forms a surface film, dilute with water as appropriate.
Premium quality primer, sealer and bonding agent, rapid drying with high bond strength. USES: Use as a primer and bonding aid, as an admixture, or for priming and dust-proofing porous surfaces. It can also be used as an adhesive as long as one surface is porous; ideal for general household repairs, textiles, crafts and light duty wood fixing. APPLICATION & MIXING RATIO: Ensure all surfaces are clean, dry and free from dust or grease. Remove all loose material and ensure underlying material is strong enough to take the weight or load to be applied. • Suction control for plastering on porous surfaces: Primer coat: dilute 1 part PVA Bond with 4 parts water, allow coat to dry before continuing. A 5L primer mix will cover approx. 115m2. Bonding coat: Apply PVA Bond undiluted. Apply fresh plaster whilst PVA is still tacky. A 5L bond mix will cover approx. 45m2. • Plastering on non-porous surfaces: Apply PVA Bond undiluted, apply fresh plaster whilst PVA is still tacky. • Dust-proofing: Dilute 1 part PVA Bond with 4 parts water, allow coat to dry before continuing. • Admixture: PVA Bond will improve workability and adhesion of plasters and cements. Cement: 1 part PVA Bond to 1 part gauging water. Plaster: 1 part PVA Bond to 5 parts gauging water. • Adhesive: Apply to one surface undiluted and whilst still wet bring the two surfaces together and clamp until dry. HEALTH & SAFETY: EUH208 contains 2-methylisothiazol-3(2H)-one and 5-chloro-2-methyl-4-isothiazolin-3-one. May produce an allergic reaction. Low hazard product – safe in normal use. Do not ingest. Wear gloves, wash splashes off skin with soap and water. If product enters eyes, irrigate immediately with clean, cold water. Keep out of reach of children. Some people are more sensitive to chemical products than others, if irritation occurs discontinue use. LIMITATIONS: Do not use in areas subject to constant water immersion or where permanent dampness is likely. Not recommended for use on new cement when cement has not fully dried. Do not use at surface temperatures below 50C. STORAGE: Store in cool, dry conditions at a temperature between 5-250C. Protect from frost and keep out of direct sunlight. Use within 24 months from date of manufacture. NOTE: Instructions for use are for general guidance only, since site conditions and labour are beyond our control. It is the user’s responsibility to check and determine suitability of use for specific applications. Always follow the instructions carefully.
Premium quality primer, sealer and bonding agent, rapid drying with high bond strength. USES: Use as a primer and bonding aid, as an admixture, or for priming and dust-proofing porous surfaces. It can also be used as an adhesive as long as one surface is porous; ideal for general household repairs, textiles, crafts and light duty wood fixing. APPLICATION & MIXING RATIO: Ensure all surfaces are clean, dry and free from dust or grease. Remove all loose material and ensure underlying material is strong enough to take the weight or load to be applied. • Suction control for plastering on porous surfaces: Primer coat: dilute 1 part PVA Bond with 4 parts water, allow coat to dry before continuing. A 5L primer mix will cover approx. 115m2. Bonding coat: Apply PVA Bond undiluted. Apply fresh plaster whilst PVA is still tacky. A 5L bond mix will cover approx. 45m2. • Plastering on non-porous surfaces: Apply PVA Bond undiluted, apply fresh plaster whilst PVA is still tacky. • Dust-proofing: Dilute 1 part PVA Bond with 4 parts water, allow coat to dry before continuing. • Admixture: PVA Bond will improve workability and adhesion of plasters and cements. Cement: 1 part PVA Bond to 1 part gauging water. Plaster: 1 part PVA Bond to 5 parts gauging water. • Adhesive: Apply to one surface undiluted and whilst still wet bring the two surfaces together and clamp until dry. HEALTH & SAFETY: EUH208 contains 2-methylisothiazol-3(2H)-one and 5-chloro-2-methyl-4-isothiazolin-3-one. May produce an allergic reaction. Low hazard product – safe in normal use. Do not ingest. Wear gloves, wash splashes off skin with soap and water. If product enters eyes, irrigate immediately with clean, cold water. Keep out of reach of children. Some people are more sensitive to chemical products than others, if irritation occurs discontinue use. LIMITATIONS: Do not use in areas subject to constant water immersion or where permanent dampness is likely. Not recommended for use on new cement when cement has not fully dried. Do not use at surface temperatures below 50C. STORAGE: Store in cool, dry conditions at a temperature between 5-250C. Protect from frost and keep out of direct sunlight. Use within 24 months from date of manufacture. NOTE: Instructions for use are for general guidance only, since site conditions and labour are beyond our control. It is the user’s responsibility to check and determine suitability of use for specific applications. Always follow the instructions carefully.
Premium quality primer, sealer and bonding agent, rapid drying with high bond strength. USES: Use as a primer and bonding aid, as an admixture, or for priming and dust-proofing porous surfaces. It can also be used as an adhesive as long as one surface is porous; ideal for general household repairs, textiles, crafts and light duty wood fixing. APPLICATION & MIXING RATIO: Ensure all surfaces are clean, dry and free from dust or grease. Remove all loose material and ensure underlying material is strong enough to take the weight or load to be applied. • Suction control for plastering on porous surfaces: Primer coat: dilute 1 part PVA Bond with 4 parts water, allow coat to dry before continuing. A 5L primer mix will cover approx. 115m2. Bonding coat: Apply PVA Bond undiluted. Apply fresh plaster whilst PVA is still tacky. A 5L bond mix will cover approx. 45m2. • Plastering on non-porous surfaces: Apply PVA Bond undiluted, apply fresh plaster whilst PVA is still tacky. • Dust-proofing: Dilute 1 part PVA Bond with 4 parts water, allow coat to dry before continuing. • Admixture: PVA Bond will improve workability and adhesion of plasters and cements. Cement: 1 part PVA Bond to 1 part gauging water. Plaster: 1 part PVA Bond to 5 parts gauging water. • Adhesive: Apply to one surface undiluted and whilst still wet bring the two surfaces together and clamp until dry. HEALTH & SAFETY: EUH208 contains 2-methylisothiazol-3(2H)-one and 5-chloro-2-methyl-4-isothiazolin-3-one. May produce an allergic reaction. Low hazard product – safe in normal use. Do not ingest. Wear gloves, wash splashes off skin with soap and water. If product enters eyes, irrigate immediately with clean, cold water. Keep out of reach of children. Some people are more sensitive to chemical products than others, if irritation occurs discontinue use. LIMITATIONS: Do not use in areas subject to constant water immersion or where permanent dampness is likely. Not recommended for use on new cement when cement has not fully dried. Do not use at surface temperatures below 50C. STORAGE: Store in cool, dry conditions at a temperature between 5-250C. Protect from frost and keep out of direct sunlight. Use within 24 months from date of manufacture. NOTE: Instructions for use are for general guidance only, since site conditions and labour are beyond our control. It is the user’s responsibility to check and determine suitability of use for specific applications. Always follow the instructions carefully.
Tilers Primer (1 litre) By Tilers Ply
Bonds, Insulates and provides a waterproof finish