Free Delivery on orders over £499
Over 40 years' experience
Price Match we'll beat any price1
Small cut tile samples - ONLY 99P

LTP Grout and Tile Protector 600ml

Product ID: 6930
  • £12.49
  • RRP £16.66
  • You save up to 25 %
Item in Stock   |   Usually dispatched within 24 hours
Loading...
Colour: Clear
Size (ml): 600ml
Approximate Coverage: 600 linear meters, depending upon the size of the grout joint and number of coats required. 5-25m2 of tile and grout, depending on the porosity and the number of coats required. 
Suitability: Use as a 'top coat' to protect from penetration by water, dirt, oil, grease and limescale, making treated surfaces easier to clean. Ideal for use in wetrooms and shower enclosures. 

You can use the LTP Coverage Calculator to confirm how much you will need of this product.

The Technical Data sheet can be found here.

NOTE: Do not use harsh abrasive cleaning agents. Clean treated areas with water and a mild PH neutral detergent like LTP Waxwash or LTP Stonewash. In some instances, it may be necessary to use a stronger cleaner to remove stubborn surface marks, in which case you may need to reseal treated areas. 

Do not spray on to acrylic or stained surfaces such as cabinets and stained timber skirting boards. Mask and protect these surfaces before application. 

Interior and Exterior use: Forms a colourless barrier and helps to protect porous wall and floor grout joints from penetration by water, dirt, oil, grease and limescale, making treated surfaces easier to keep clean. 

Ideal for use in wetrooms and shower enclosures. Used as a 'top coat', this product is an easy way to further protect natural stone and all other types of masonry surfaces. Overspray on most surfaces will completely dissipate and not leave any hard-to-remove residue. 

When sealing a porous stone, it is advisable to use a suitable liquid impregnator such as LTP Mattstone or LTP Colour Intensifier before finishing with LTP Grout and Tile Protector to achieve the best result. 

Directions for use: Areas to be treated must be cleaned. Older contaminated and dirty grouting should be cleaned with LTP Grimex and then rinsed thoroughly. Newly grouted sirfaces should be left to cure for about 20-30 minutes and should be clean and free from dust before application. Always test the product on an inconspicuous area for suitability before general application. 

Shake can well. Spray 15-20cm from the surface and spray in a sweeping motion. Touch dry within 5 minutes. a 2-3 hour curing ti8ime is recommended upon completion before allowing traffic. 

For wet areas (including shower enclosures and werooms): allow the sealer to cure for a minimum of 24 hours before use. Test area after application with a little water. If the water is absorbed, a second or even third coat may be required to obtain maximum performance. 

Only use in open or well-ventilated areas. Open windows and if possible, use fans to circulate the air. It is recommended that a suitable respiratory mask be worn at all times.

Overspray on highly polished porcelain or stone and highly glazed surfaces may in some cases leave a slight residue, in which case, wipe up any excess within 5 minutes. Stubborn residues left on the surface can be removed with the application of more LTP Grout and Tile Protector which should then be buffed off immediately.

FREE DELIVERY - orders over £499.00, will take up to 2-3 working days (excluding Scottish Highlands and Lowlands). 

STANDARD DELIVERY - £39.00 for orders under £499.00, will take up to 2-3 working days (excluding Scottish Highlands and Lowlands).

Tiles will be shrink-wrapped on a pallet and delivered to the ground-level edge of your property (curb-side). The driver will NOT be able to assist getting the tiles into your property due to insurance purposes. Orders under 20kg weight will be delivered with a parcel courier.

When ordering tile samples, you will receive a small cut sample either 10cm x 10cm or 15cm x 15cm.

We hope that you will be pleased with the tiles that you have bought from Tiles-Direct. But, if you wish to return any goods to us, it must be returned to us in re-saleable condition, in its full original carton/box and the range is still for sale via our website. The customer will be responsible for organising the return of the goods to our distribution warehouse return centre within 30 days of the delivery date. The refund will be processed within 3-5 working days following our receipt of the re-saleable items.

There will be a restocking charge of 10% of the goods returned.

If the goods are not in a re-saleable condition when they arrive back with us, Tiles-Direct reserve the right to amend the amount of the refund based on the value of re-saleable goods.

If you decide to return an entire order, costs will need to be deducted for the delivery, and the return costs.

Delivery charges vary for the following postcodes and will be delivered between 5-7 working days to the following postcodes: GY, HS, IM, IV41,IV30, IV42, IV44 – 49, IV55, IV56, JE, KA27 – 29, KW1 – 14, KW15 – 17, PA21 – 38, PA20, PA40+, PH9, PH15 – 20, PH32 – 44, PH49, PH50, TR21 – 25, ZE.

NOTE: There will be an extra charge for the following postcodes:

AB, DD, IV, KW, PH, FK, FY, TR, PA, KA, LL, PO, SA, CA, DG, EH, EX, G, LD, ML, PL, SY, TA, TD AND TQ.

Vehicle Size & Access

7.5 TONNE TRUCK

18 TONNE TRUCK

The best way to determine if a lorry can access your home/business address is whether you have a bin vehicle collecting from outside your premises.

Wide enough access to accept large delivery lorries (minimum 2.8m)

No obstacles - free of obstacles that could obstruct delivery (e.g. low hanging tree branches)

No Inclines - the delivery area should be flat, rather than a steep slope

Hard and level surface - hand pallet trucks only operate on hard flat surfaces, not loose ground such as grass or gravel

Turning space - ample room to manoeuvre and position the lorry

You MUST advise if there are any parking or time restrictions at the delivery point.           

General Delivery Information:

From our courier, you will receive a text message on the day of the delivery with an 2-hour approximate delivery window. If there any changes or delays you will receive an update via text.

If you have any doubts regarding the condition of the delivery, please ensure to sign for the goods “UNCHECKED”.

You must be available to accept delivery on the day. Failure to do so will result in paying for a re-delivery charge.

Due to insurance and health and safety regulations, our couriers are unable to transport goods into a customer’s property.

 

For Quotations: quotations@tiles-direct.com

For Breakages: breakages@tiles-direct.com

We accept payments over the internet, by phone, fax and mail. We accept Visa, MasterCard, Diners, JCB and all the major credit cards.

The security of your personal information is important to us. When you enter sensitive information (such as credit card number) on our order forms, we encrypt that information using secure socket layer technology (SSL).
We follow generally accepted industry standards to protect the personal information submitted to us, both during transmission and once we receive it. No method of transmission over the Internet, or method of electronic storage, is 100% secure, however. Therefore, while we strive to use commercially acceptable means to protect your personal information, we cannot guarantee its absolute security.

If you have any questions about security on our Web site, you can send an email to us at info@tiles-direct.com.

 


Site Security

All Tiles-Direct.com employees take your personal information very seriously. All employees must learn and obey our security policies. Access to member personal information is limited to key management personnel and our member services department.

Credit Card Information

Credit Card details are only required during a purchase from our website. The details are collected on Secure Trading' secure site and only used for processing by Secure Trading. We do not see or store your credit card details on our site.

ID [Address] Verification

We use secure trading to verify your credit card billing information, in order to ensure that the user is the person identified on the credit card and to insure against fraud.